热能与动力工程专业英语

　　《热能与动力工程专业英语（第3版）》涵盖了热能与动力工程专业的主要分支学科，以培养热能与动力工程专业学生的专业英语阅读能力为主要目标。全书共分八个部分.主要内容为：流体力学与流体机械，热力学与传热，燃料及燃烧，制冷与空调，锅炉设备，涡轮机，环保、腐蚀，部分参考译文等，书后附录中还给出了常用缩写词和常用计量单位换算。《热能与动力工程专业英语（第3版）》有较强的实用性和知识性，高等院校热能与动力工程专业的本科生和研究生可根据其选修方向有针对性地学习相关单元。《热能与动力工程专业英语（第3版）》既可作为高等学校热能与动力工程专业学生的专业英语教材，也可供从事有关热能与动力工程专业的工程技术人员学习、参考之用。

暂缺《热能与动力工程专业英语》作者简介

1 Fluid Mechanics and Fluid Machines
1.1 Definition of a Fluid and Classification of Fluid Flow
1.2 Historical Development of Fluid Mechanics
1.3 The Characteristics of Fluids
1.4 Scope Significance and Trend of Fluid Mechanics
1.5 The Principles of Fluid Machines
1.6 Tmbulent Flow
2 Thermodynamics and Heat Transfer
2.1 Basic Concepts of Thermodynamics
2.2 Tbermodynamics Systems
2.3 General Characteristics of Heat Transfer
2.4 Conduction
2.5 Natural Convection
2.6 Radiation
3 Fuels and Combustion
3.1 Heat of Combustion
3.2 Combustion Equipment
3.3 Fuel-ash
3.4 The Mechanisms of Gaseous Fuels Combustion
3.5 The Combustion of Liquid Fuels and Solid Fuels
3.6 Nuclear Fuels
3.7 Liquid By-product Fuels
4 Refrigeration and Airconditioning
4.1 The Ideal Basic Vapor Compression Refrigeration Cycle
4.2 Refrigerant Evaporators
4.3 Refrigeration
4.4 Absorption Heat Pumps
4.5 Comfort and Discomfort
4.6 Compressor Failure
4.7 Operation and Maintenance of the Aireonditioning Plant
4.8 Air-conditioning cycle equipment
5 Boiler
5.1 Boiler and Its Development
5.2 Stokers
5.3 Boiler Circulation
5.4 Fossil-fuel Boilers for Eleetrie Utilities
5.5 Spreader Stoker
5.6 Economizers and Air Heaters
5.7 Selection of Coal-burning Equipment
5.8 Oil and Gas Burning Equipment
5.9 Furnace
5.10 Gas and Fuel Oil - fired Furnaces
5.11 Boiler Design
5.12 Superheaters and Reheaters
6 Turbine
6.1 Steam Turbine
6.2 Gas Turbine
6.3 Compressor
6.4 Gas Turbine Plants
6.5 Classification of Steam Turbines
6.6 Current Practice and Trends of Turbine
6.7 The Modem Steam Power Plant
6.8 Wind Turbines
6.9 The Principle of Steam Turbine
7 Environmental Protection, Corrosion and Others
7.1 Ash Removal and Disposal
7．2 Oil-ash Corrosion
7．3 Control 0fPollutant Gases
7．4 Fans
7．5 Stokers
7．6 Flue Gas Desulfunzation
7．7 Steam Separation
7．8 Pulverizers
7．9 Prevention 0f Scaling in Boilers
7．10AirPollution
7．11 Pressure Measurement
7．12 Clean Coal Teachnologies
参考译文
流体的定义和流体流动的分类（1．1)
流体力学发展史（1．2)
热力系统的基本概念（2．1)
导热（2．4)
液体燃料的燃烧（3．5)
核燃料（3．6)
液态副产品燃料（3．7)
理想的基本蒸气压缩制冷循环（4．1)
吸收式热泵（4．4)
压缩机故障（4．6)
锅炉水循环（5．3)
电力公用事业电站燃用矿物燃料的锅炉（5．4)
燃油燃气锅炉炉膛设计（5．10)
过热器和再热器（5．12)
汽轮机（6．1)
燃气轮机（6．2)
除灰及灰的处理（7．1)
油灰腐蚀（7．2)
压力测量（7．11)
洁净煤技术（7．12)
Words and Expressions
附录I 常用缩写词
附录Ⅱ 常用计量单位换算