石油管材及装备材料服役行为与结构安全国家重点实验室科研成果汇编（2020年）

　　本书汇编了中国石油集团石油管工程技术研究院、石油管材及装备材料服役行为与结构安全国家重点实验室、中国石油集团石油管工程重点实验室和陕西省石油管材及装备材料服役行为与结构安全重点实验室在2020年正式发表在国际国内刊物上的论文和2020年授权专利及省部级以上获奖成果，反映了近几年石油管工程的科研成果及进展。内容涉及输送管与管线安全评价、油井管与管柱失效预防、腐蚀防护与非金属材料等方面。本书可供从事石油管工程的技术人员和石油院校相关专业师生参考。

暂缺《石油管材及装备材料服役行为与结构安全国家重点实验室科研成果汇编（2020年）》作者简介

第一篇 论文篇
一、输送管与管线安全评价
输送管产品开发与工程应用技术支撑体系
中国X80管线钢和钢管研发应用进展及展望
大应变管线钢和钢管的关键技术进展及展望
3 16L衬里复合管道主要失效形式及其完整性检测技术研究
Constitutive Equation for Describing True Stress-Strain Curves over a Large Range of Strains
A Review of Dynamic Muhiaxial Experimental Techniques
Fatigue Failure Analysis of Dented Pipeline and Simulation Calculation
Failure Analysis on Tee Pipe of Duplex Stainless in an Oilfield
Cracking Analysis of a Newly Built Gas Transmission Steel Pipe
Microstructure and Impact Toughness of X70-L245 Butt Girth Weld in Natural Gas Station
Dynamic Impact Damage of Oil and Gas Pipelines
X70管道自保护药芯焊丝环焊接头力学性能及影响因素
埋地管道泄漏数值模拟分析
二、油井管与管柱失效预防
复杂工况油套管柱失效控制与完整性技术研究进展及展望
复杂压裂页岩气井套管变形机制及控制方法
Investigation on Impact Absorbed Energy Index of Drill Pipe
Aging Treatment Effect on Microstructure and Mechanical Properties of Ti-5A1-3V-1.5 Mo-2Zr Titanium Alloy Drill Pipe
Tribological Properties of Ni／Cu／Ni Coating on the Ti-6Al-4V Alloy after Annealing at Various Temperatures
Application Analysis of Epoxy-Coated Tubing in an Oilfield
Failure Analysis of Casing Dropping in Shale Oil Well during Large Scale Volume Fracturing
Numerical Analysis of Casing Deformation under Cluster Well Spatial Fracturing
Fracture Failure Analysis of C110 Oil Tube in a Western Oil Field
石油管用Ti-6A1-4V-0.1Ru钛合金高温流变行为及预测模型研究
油气开采用钛合金石油管材料耐腐蚀性能研究
钛合金油套管抗挤毁性能计算与实验
三、腐蚀防护与非金属材料
Facile Fabrication of Sn02 Modified Ti02 Nanorods Film for Efficient Photocathodic Protection of 304 Stainless Steel under Simulated Solar Light
Effect of C02／H2S and Applied Stress on Corrosion Behavior of 15Cr Tubing in Oil Field Environment
Corrosion Behavior of Cr-Bearing Steels in C02-02-H20 Multi-Thermal-Fluid Environment
Corrosion Behavior of Reduced-Graphene-Oxide-Modified Epoxy Coatings on N80 Steel in 10.0 wt％NaCl Solution
Experimental and Simulation Investigation on Failure Mechanism of a Polyethylene Elbow Liner Used in an Oilfield Environment
Failure Analysis on the Oxygen Corrosion of the Perforated Screens Used in a Gas Injection Huff and Puff Well
Investigation on Leakage Cause of Oil Pipeline in the West Oilfield of China
Comparative Study on Hydrogen Embritdement Susceptibility in Heat-Affected Zone of TP321 Stainless Steel
External Stress Corrosion Cracking Risk Factors of High Grade Pipeline Steel
Analysis of Corrosion Behavior on External Surface of 11OS Tubing
Failure Analysis and Solution to Bimetallic Lined Pipe
外加电位对X80管线钢在轮南土壤模拟溶液中应力腐蚀行为的影响
页岩气输送用转角弯头内腐蚀减薄原因分析
16Mn管线钢的焊缝表面冲蚀机理研究
酸洗钝化对316L／IAl5双金属机械复合管环焊缝耐蚀性的影响
干湿交替砂土环境下X80管线钢的腐蚀行为研究
一种乙烯裂解炉管高温损伤评估的新方法
炼化企业常压塔顶露点温度计算及缓蚀剂性能研究
连续纤维复合材料环形试样蠕变行为研究
非金属智能连续管拉伸层力学特性研究
四、其他
A Strain Rate Dependent Fracture Model of 7050 Aluminum Alloy
Effects of Pre-Oxidation on the Corrosion Behavior of Pure Ti under Coexistence of Solid NaCl Deposit and Humid Oxygen at 600℃: the Diffusion of Chlorine
Failure Analysis of Crankshaft of Fracturing Pump
Failure Analysis of a Sucker Rod Fracture in an Oilfield
Stress Analysis of Large Crude Oil Storage Tank Subjected to Harmonic Settlement
Study on Remaining Oil Distribution of Single Sand Body in Yan 10 Reservoir in Zhenbei Area，Ordos Basin
第二篇 成果篇
一、省部级科技奖励
1.OD1422mm X80管线钢管研制及应用技术
2.复杂工况油气井管柱腐蚀控制技术及工程应用
3.西部油气田集输管线内腐蚀控制技术及