11G101-1混凝土结构施工图平面整体表示方法制图规则和构造详图：现浇混凝土框架、剪力墙、梁、板（英文版）

　　该图集是国标图集11G101-1《混凝土结构施工图平面整体表示方法制图规则和构造详图（现浇混凝土框架、剪力墙、梁、板）》的英文版，与中文版图集在技术内容上保持一致，条款完全吻合，适用于我国从事海外建设的工程技术人员，同时也适用于国外工程技术人员。

暂缺《11G101-1混凝土结构施工图平面整体表示方法制图规则和构造详图：现浇混凝土框架、剪力墙、梁、板（英文版）》作者简介

Contents    1
General Instruction    5
Part One Drawing Rules of Ichnographic Representing Method
1 General Provisions    6
2 Rules of Ichnographic Construction Drawings of Columns    8
2.1 Representing method of ichnographic construction drawings of columns    8
2.2 Tabulated annotation    8
2.3 Sectional annotation    10
2.4 Other    10
Example of ichnographic construction drawings of columns using tabulated annotation    11
Example of ichnographic construction drawings of columns using sectional annotation    12
3 Rules of Ichnographic Construction Drawings of Shear Walls    13
3.1 Representing method of ichnographic construction drawings of shear walls    13
3.2 Tabulated annotation    13
3.3 Sectional annotation    17
3.4 Representing method of openings in shear wall    17
3.5 Representing method of exterior wall of basement    19
3.6 Other    20
Example of ichnographic construction drawings of shear walls using tabulated annotation    21
Example of ichnographic construction drawings of shear walls using sectional annotation    23
Example of ichnographic construction drawings of exterior walls of basement using ichnographic annotation    24
4 Rules of Ichnographic Construction Drawings of Beams    25
4.1 Representing method of ichnographic construction drawings of beams    25
4.2 Ichnographic annotation    25
4.3 Sectional annotation    32
4.4 Requirements for length of beam top longitudinal bars at support    32
4.5 Requirements for length of bottom bars those do not extend into support    32
4.6 Other    33
Example of ichnographic construction drawings of beams using ichnographic annotation    34
Example of ichnographic construction drawings of beams using sectional annotation    35
5 Rules of Ichnographic Construction Drawings of Slab with Beams    36
5.1 Representing method of ichnographic construction drawings of slab with beams    36
5.2 Slab concentrated annotation    36
5.3 In-situ annotation at slab support    37
5.4 Other    40
Example of ichnographic construction drawings of slab with beams    41
6 Rules of Ichnographic Construction Drawings of Slab without beams    42
6.2 Concentrated annotation for slab strip    42
6.3 In-situ annotation at support of slab strip    43
6.4 Representing method of embedded beam    43
6.5 Other    44
Example of ichnographic construction drawings of slab without beams    45
7 Rules for Drawing of Slab-related Detailing    46
7.1 Types and the representing method of slab-related detailing    46
7.2 Direct annotation for slab-related detailing    46
7.3 Other    52
Part Two Standard Detailing Drawings
The basic anchorage length,lab labE, anchorage length la, anti-seismic anchorage length laE and correction factor ξa for tensile reinforcement    53
Environment classification for concrete structures Minimum thickness of concrete cover Detailing of stirrups in the lapping section of longitudinal stressed bars    54
Hook and mechanical anchorage type of longitudinal bars Lapping length lll,llEE for binding longitudinal bars under tension    55
Detailing of closed stirrups and hooks of tie bars Equivalent diameter and minimum clear spacing of twin bars in beam Spacing requirements for bars in beam and column Detailing of spiral stirrups    56
Connection detailing of longitudinal bars in anti-seismic frame column KZ    57