书籍详情
CCNA学习指南：英文版 640-801
作者：（美）Todd Lammle著
出版社：电子工业出版社
出版时间：2004-01-01
ISBN：9787505393479
定价：¥63.00
购买这本书可以去
内容简介
本书作为系列中的一本，针对CCNA：640-801考试而推出。书中的内容从联网和TCP/IP的背景开始介绍，接着介绍了子网划分、Cisco网络操作系统和命令行界面，然后讲述了路由和交换，最后介绍了VLAN和WAN等内容。世界著名的网络系统公司Cisco公司建立于20世纪80年代，主要致力于开发、生产、销售高档网关、路由器和网络互联设备，其产品广泛应用于局域网、广域网和因特网。在微软公司一方独大的互联网络世界中，Cisco却是路由和交换领域真正的无冕之王。由于Cisco公司的产品不同于普通的计算机软、硬件产品，它的技术含量高，原理复杂，因此学习和掌握其工作原理及使用方法需要许多相关知识和实践经验。为保证使用、管理或提供Cisco产品服务的技术人员能够具备相应的技术水平，Cisco公司设立了一系列认证考试，不仅如此，其考试目标和内容也随其产品不断地发生变化。为覆盖其最新的考试目标，我们采用“原版引进，重新排版印刷”的方式以最快的速度出版Cisco认证考试系列相应科目的辅导丛书来满足读者的需求。本书作为系列中的一本，针对CCNA：640-801考试而推出。书中的内容从联网和TCP/IP的背景开始介绍，接着介绍了子网划分、Cisco网络操作系统和命令行界面，然后讲述了路由和交换，最后介绍了VLAN和WAN等内容。
作者简介
暂缺《CCNA学习指南：英文版 640-801》作者简介
目录
Table of Contents
Introduction
Assessment Test
Chapter 1 Internetworking
Internetworking Basics
Internetworking Modls
The Layered Approach
Advantages of Reference Models
The OSI Reference Model
The Application Layer
The Presentation Layer
The Session Layer
The Transport Layer
The Network Layer
The Data Link Layer
Ther Physical Layer
Ethernet Networking
Half-and Full-Duplex Ethernet
Ethernet at the Data Link Layer
Ethernet at the Physical Layer
Ethernet Cabling
Straight-Through Cable
Crossover Cable
Rolled Cable
Wireless Networking
Data Encapsulation
The Cisco Theree-Layer Hierarchical Model
The Core Layer
The Distribution Layer
The Access Layer
Summary
Exam Essentials
Key Terms
Written Lab 1
Written Lab 1.1:OSI Questions
Written Lab 1.2:Defining the OSE Layers and Devices
Written Lab 1.3:Identifying Collision and Broadcast Domains
Review Questions
Answers to Review Questions
Answers to Written Lab 1
Ansers to Written Lab 1.1
Ansers to Written Lab 1.2
Ansers to Written Lab 1.3
Chapter 2 Internet Protocols
TCP/IP and the DoD Model
The Process/Aoolication Layer Protocols
The Host-to-Host Layer Protocols
The Internet Layer Protocols
Binary to Decimal and Hexacecimal Conversion
IP Addressing
IP Terminology
The Hierarchical IP Addressing Scheme
Private IP Addresses
Broadcast Addresses
Introduction to Network Address Translation(NAT)
Summary
Exam Essentials
Key Terms
Written Lab 2
Review Questions
Answers to Review Questions
Answers to Written Lab 2
Chapter 3 IP Subnetting and Variable Length Subnet Masks(VLSM)
Subnetting Basics
How to Create Subnets
Subnet Masks
Classless Inter-Domain Routing(CIDR)
Subnetting Class C Addresses
The Binary Method:Subnetting a Class C Address
The Fast Way:Subnetting a Class C Address
Subnetting Class B Addresses
Subnetting Class A Addresses
Variable Length Subnet Masks(VLSMs)
VLSM Design
Implementing VLSM Networks
Troubleshooting IP Addressing
Determining IP Address Problems
Summary
Exam Essentials
Key Terms
Written Lab 3
Review Questions
Answers to Review Questions
Answers to Written Lab 3
Chapter 4 Introduction to the Cisco IOS
The Clsco Rorter User Interface
Cisco Router IOS
Connecting to a Cisco Router
Bringing Up a Router
Setup Mode
Command-Line Interface
Logging into the Router
Overview of Router Modes
CLI Prompts
Editing and Help Features
Gathering Basic Routing Information
Setting Passwords
Encrypting Your Passwords
Banners
Router Interfaces
Hostnames
Descriptions
Viewing and Saving Configurations
Verifying Your Configuration
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 4
Hands-on Labs
Hands-on Labs 4.1:Logging into a Router
Hands-on Labs 4.2:Using the Help and Editing Features
Hands-on Labs 4.3:Saving a router Configuration
Hands-on Labs 4.4:Setting Your Passwords
Hands-on Labs 4.5:Setting the Hostname,Descriptions,IP Address,and Clock Rate
Review Questions
Ansers to Review Questions
Ansers to Written Lab 4
Chapter 5 IP Routing
Routing Basics
The IP Routing Process
IP Routing in a Larger Network
Configuring IP Routing in Our Network
Static Routing
Default Routing
Dynamic Routing
Routing Protocol Basics
Administrative Distances
Routing Protocols
Distance-Vector Routing Protocols
Routing Loops
Maximum Hop Count
Split Horizon
Route Poisoning
Holddowns
Routing Information Protocol (RIP)
RIP Timers
Configuring RIP Routing
Verifying the RIP Routing Tables
Holding Down RIP Propagetions
Interior Gateway Routing Protocol(IGRP)
IGRP Timers
Configuring IGRP Routing Tables
Verifying Your Configurations
The show protocols Command
The show ip protocols Command
The debug ip rip Command
The debug ip igrp Command
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 5
Hands-on Labs
Hands-on Lab 5.1:Creating Static Routes
Hands-on Lab 5.2:Dynamic Routing with RIP
Hands-on Lab 5.3:Dynamic Routing with IGRP
Review Questions
Answers to Review Questions
Answers to Written Lab 5
Chapter 6 Enhanced IGRP(EIGRP)and Open Shortest
Path First (OSPF)
EIGRP Features and Operation
Protocol-Dependent Modules
Neighbor Discovery
Reliable Transport Protocol (RTP)
Diffusing Update Algorithm(DUAL)
Using EIGRP to Support Large Networks
Multiple AS
VLSM Support and Summarization
Route Discovery and Maintenance
Configuring EIGRP
Lab_A
Lab_B
Lab_C
Verifying EIGRP
Open Shortest Path First(OSPF)Basics
OSPF Terminology
SPF Tree Calculation
Configuring OSPF
Enabling OSPF
Configuring OSPF Areas
Verifying OSPF Configuration
The show ip ospf Command
The show ip ospf database Command
The show ip ospf interface Command
The show ip ospf neighbor Command
The show ip ip protocols Command
OSPF and Loopback Interfaces
Configuring Loopback Interfaces
Verifying Loopbacks and RIDs
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Wirtten Lab 6
Hands-On Labs
Lab 6.1:Configuring and Verifying EIGRP
Lab 6.2:Enabling the OSPF Process
Lab 6.3:Configuring OSPF Neighbors
Lab 6.4:Verifying OSPF Operation
Review Questions
Answers to Review Questions
Answers to Written Lab 6
Chapter 7 Layer 2 Switching
Before Layer 2 Switching
Switching Services
Limitations of Layer 2 Switching
Bridging vs.LAN Switching
Three Switch Functions at Layer 2
Spanning Tree Protocol(STP)
Spanning Tree Terms
Spanning Tree Operations
Spanning Tree Example
LAN Switch Types
Cut-Through (Real Time)
FragmentFree (Modified Cut-Through)
Store-and-Forward
Configuring the Catalyst 1900 and 2950 Switches
1900 and 2950 Switch Startup
Setting the Passwords
Setting the Hostname
Setting IP Information
Configuring Interface Descriptions
Erasting the Switch Configuration
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 7
Hands-on Labs
Hands-on Labs 7.1:Switch Basic Administrative Configurations
Hands-on Labs 7.2:Verifying the Switch Configurations
Review Questions
Answers to Review Questions
Answers to Written Lab 7
Chapter 8 Virtual LANs(VLANs)
VLAN Basics
Broadcast Control
Security
Flexibility and Scalability
VLAN Memberships
Static VLANs
Dynamic VLANs
Identifying VLANs
Frame Tagging
VLAN Identification Methods
Inter-Switch Link (ISL)Protocol
VLAN Trunking Protocol(VTP)
VTP Modes of Operation
VTP Pruning
Routing between VLANs
Configuring VLANs
Assigning Switch Ports to VLANs
Configuring Trunk Ports
Configuring Inter-VLAN Routing
Configuring VTP
Configuring Switchig in Our Sample Internetwork
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 8
Review Questions
Answers to Review Questions
Answers to Written Lab 8
Chapter 9 Managing a Cisco Internetwork
The Internal Components of a Cisco Router
The Router Boot Sequence
Managing Configuration Registers
Understanding the Configuration Register Bits
Checking the Current Configuration Register Value
Changing the Configuration Register
Recovering Passwords
Backing Up and Restoring the Cisco IOS
Verifying Flash Memory
Backing Up the Cisco IOS
Restoring or Upgrading the Cisco Router IOS
Backing Up the Cisco Router Configuration
Restoring the Cisco Router Configuration
Erasing the Configuration
Using Cisco Discovery Protocol(CDP)
Getting CDP Timers and Holdtime Information
Gathering Neighbor Information
Gathering Port and Interface Information
Using Telnet
Telnetting into Multiple Devices Simultaneously
Checking Telnet Connections
Checking Telnet Users
Closing Telnet Sessions
Resolving Hostnames
Building a Host Table
Using DNS to Resolve Names
Checking Network Connectivity
Using the ping Command
Using the traceroute Command
Sumary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 9
Hands-on Labs
Hands-on Labs 9.1:Backing Up Your Router IOS
Hands-on Labs 9.2:Upgrading or Restoring Your Router IOS
Hands-on Labs 9.3:Backing Up the Router Configuration
Hands-on Labs 9.4:Using the Cisco Discovery Protocol(CDP)
Hands-on Labs 9.5:Using Telnet
Hands-on Labs 9.6:Resolving Hostnames
Review Questions
Answers to Review Questions
Answers to Written Lab 9
Chapter 10 Internet Protocols
Introduction to Access Lists
Standard Access Lists
Wildcard Masking
Standard Access List Example
Controlling VTY (Telnet)Access
Extended Access Lists
Extended Access List Example
Named Access Lists
Monitoring ccess Lists
Summary
Exam Essentials
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 10
Hands-on Labs
Hands-on Labs 10.1:Standard IP Access Lists
Hands-on Labs 10.2:Extended IP Access Lists
Review Questions
Answers to Review Questions
Answers to Written Lab 10
Chapter 11 Wide Area Networking Protocols
Introduction to Wide Area Networks
Definging WAN Terms
WAN Connection Types
WAN Support
Cabling the Wide Area Network
Serial Transmission
Data Terminal Equipment and Data Communication
Equipment
Fixed and Modular Interfaces
High-Level Data-Link Control(HDLC)Protocol
Point-to-Point Protocol(PPP)
Link Control Protocol(LCP)Configuration Options
PPP Session Establishment
Configuring PPP on Cisco Routers
Configuring PPP Encapsulation
Frame Relay
Intrduction to Frame Relay Technology
Frame Relay Implementation and Monitoring
Integrated Services Digital Network (ISDN)
ISDN Connections
ISDN Components
Basic Rate Interface(BRI)
Primary Rate Interface(PRI)
ISDN with Cisco Routers
Dial-on-Demand Routing(DDR)
Configuring DDR
Optional Commands
DDR with Access Lists
Verifying the ISDN Operation
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 11
Hands-on Labs
Hands-on Labs 11.2: Configuring and Monitoring HDLC
Hands-on Labs 11.3:Configuring Frame Relay and Subinterfaces 497
Hands-on Labs 11.4:Configuring ISDN and BRI Interfaces
Review Questions
Answers to Review Questions
Answers to Wretten Lab 11
Appendix A Commands in This Study Guide
Glossary
Introduction
Assessment Test
Chapter 1 Internetworking
Internetworking Basics
Internetworking Modls
The Layered Approach
Advantages of Reference Models
The OSI Reference Model
The Application Layer
The Presentation Layer
The Session Layer
The Transport Layer
The Network Layer
The Data Link Layer
Ther Physical Layer
Ethernet Networking
Half-and Full-Duplex Ethernet
Ethernet at the Data Link Layer
Ethernet at the Physical Layer
Ethernet Cabling
Straight-Through Cable
Crossover Cable
Rolled Cable
Wireless Networking
Data Encapsulation
The Cisco Theree-Layer Hierarchical Model
The Core Layer
The Distribution Layer
The Access Layer
Summary
Exam Essentials
Key Terms
Written Lab 1
Written Lab 1.1:OSI Questions
Written Lab 1.2:Defining the OSE Layers and Devices
Written Lab 1.3:Identifying Collision and Broadcast Domains
Review Questions
Answers to Review Questions
Answers to Written Lab 1
Ansers to Written Lab 1.1
Ansers to Written Lab 1.2
Ansers to Written Lab 1.3
Chapter 2 Internet Protocols
TCP/IP and the DoD Model
The Process/Aoolication Layer Protocols
The Host-to-Host Layer Protocols
The Internet Layer Protocols
Binary to Decimal and Hexacecimal Conversion
IP Addressing
IP Terminology
The Hierarchical IP Addressing Scheme
Private IP Addresses
Broadcast Addresses
Introduction to Network Address Translation(NAT)
Summary
Exam Essentials
Key Terms
Written Lab 2
Review Questions
Answers to Review Questions
Answers to Written Lab 2
Chapter 3 IP Subnetting and Variable Length Subnet Masks(VLSM)
Subnetting Basics
How to Create Subnets
Subnet Masks
Classless Inter-Domain Routing(CIDR)
Subnetting Class C Addresses
The Binary Method:Subnetting a Class C Address
The Fast Way:Subnetting a Class C Address
Subnetting Class B Addresses
Subnetting Class A Addresses
Variable Length Subnet Masks(VLSMs)
VLSM Design
Implementing VLSM Networks
Troubleshooting IP Addressing
Determining IP Address Problems
Summary
Exam Essentials
Key Terms
Written Lab 3
Review Questions
Answers to Review Questions
Answers to Written Lab 3
Chapter 4 Introduction to the Cisco IOS
The Clsco Rorter User Interface
Cisco Router IOS
Connecting to a Cisco Router
Bringing Up a Router
Setup Mode
Command-Line Interface
Logging into the Router
Overview of Router Modes
CLI Prompts
Editing and Help Features
Gathering Basic Routing Information
Setting Passwords
Encrypting Your Passwords
Banners
Router Interfaces
Hostnames
Descriptions
Viewing and Saving Configurations
Verifying Your Configuration
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 4
Hands-on Labs
Hands-on Labs 4.1:Logging into a Router
Hands-on Labs 4.2:Using the Help and Editing Features
Hands-on Labs 4.3:Saving a router Configuration
Hands-on Labs 4.4:Setting Your Passwords
Hands-on Labs 4.5:Setting the Hostname,Descriptions,IP Address,and Clock Rate
Review Questions
Ansers to Review Questions
Ansers to Written Lab 4
Chapter 5 IP Routing
Routing Basics
The IP Routing Process
IP Routing in a Larger Network
Configuring IP Routing in Our Network
Static Routing
Default Routing
Dynamic Routing
Routing Protocol Basics
Administrative Distances
Routing Protocols
Distance-Vector Routing Protocols
Routing Loops
Maximum Hop Count
Split Horizon
Route Poisoning
Holddowns
Routing Information Protocol (RIP)
RIP Timers
Configuring RIP Routing
Verifying the RIP Routing Tables
Holding Down RIP Propagetions
Interior Gateway Routing Protocol(IGRP)
IGRP Timers
Configuring IGRP Routing Tables
Verifying Your Configurations
The show protocols Command
The show ip protocols Command
The debug ip rip Command
The debug ip igrp Command
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 5
Hands-on Labs
Hands-on Lab 5.1:Creating Static Routes
Hands-on Lab 5.2:Dynamic Routing with RIP
Hands-on Lab 5.3:Dynamic Routing with IGRP
Review Questions
Answers to Review Questions
Answers to Written Lab 5
Chapter 6 Enhanced IGRP(EIGRP)and Open Shortest
Path First (OSPF)
EIGRP Features and Operation
Protocol-Dependent Modules
Neighbor Discovery
Reliable Transport Protocol (RTP)
Diffusing Update Algorithm(DUAL)
Using EIGRP to Support Large Networks
Multiple AS
VLSM Support and Summarization
Route Discovery and Maintenance
Configuring EIGRP
Lab_A
Lab_B
Lab_C
Verifying EIGRP
Open Shortest Path First(OSPF)Basics
OSPF Terminology
SPF Tree Calculation
Configuring OSPF
Enabling OSPF
Configuring OSPF Areas
Verifying OSPF Configuration
The show ip ospf Command
The show ip ospf database Command
The show ip ospf interface Command
The show ip ospf neighbor Command
The show ip ip protocols Command
OSPF and Loopback Interfaces
Configuring Loopback Interfaces
Verifying Loopbacks and RIDs
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Wirtten Lab 6
Hands-On Labs
Lab 6.1:Configuring and Verifying EIGRP
Lab 6.2:Enabling the OSPF Process
Lab 6.3:Configuring OSPF Neighbors
Lab 6.4:Verifying OSPF Operation
Review Questions
Answers to Review Questions
Answers to Written Lab 6
Chapter 7 Layer 2 Switching
Before Layer 2 Switching
Switching Services
Limitations of Layer 2 Switching
Bridging vs.LAN Switching
Three Switch Functions at Layer 2
Spanning Tree Protocol(STP)
Spanning Tree Terms
Spanning Tree Operations
Spanning Tree Example
LAN Switch Types
Cut-Through (Real Time)
FragmentFree (Modified Cut-Through)
Store-and-Forward
Configuring the Catalyst 1900 and 2950 Switches
1900 and 2950 Switch Startup
Setting the Passwords
Setting the Hostname
Setting IP Information
Configuring Interface Descriptions
Erasting the Switch Configuration
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 7
Hands-on Labs
Hands-on Labs 7.1:Switch Basic Administrative Configurations
Hands-on Labs 7.2:Verifying the Switch Configurations
Review Questions
Answers to Review Questions
Answers to Written Lab 7
Chapter 8 Virtual LANs(VLANs)
VLAN Basics
Broadcast Control
Security
Flexibility and Scalability
VLAN Memberships
Static VLANs
Dynamic VLANs
Identifying VLANs
Frame Tagging
VLAN Identification Methods
Inter-Switch Link (ISL)Protocol
VLAN Trunking Protocol(VTP)
VTP Modes of Operation
VTP Pruning
Routing between VLANs
Configuring VLANs
Assigning Switch Ports to VLANs
Configuring Trunk Ports
Configuring Inter-VLAN Routing
Configuring VTP
Configuring Switchig in Our Sample Internetwork
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 8
Review Questions
Answers to Review Questions
Answers to Written Lab 8
Chapter 9 Managing a Cisco Internetwork
The Internal Components of a Cisco Router
The Router Boot Sequence
Managing Configuration Registers
Understanding the Configuration Register Bits
Checking the Current Configuration Register Value
Changing the Configuration Register
Recovering Passwords
Backing Up and Restoring the Cisco IOS
Verifying Flash Memory
Backing Up the Cisco IOS
Restoring or Upgrading the Cisco Router IOS
Backing Up the Cisco Router Configuration
Restoring the Cisco Router Configuration
Erasing the Configuration
Using Cisco Discovery Protocol(CDP)
Getting CDP Timers and Holdtime Information
Gathering Neighbor Information
Gathering Port and Interface Information
Using Telnet
Telnetting into Multiple Devices Simultaneously
Checking Telnet Connections
Checking Telnet Users
Closing Telnet Sessions
Resolving Hostnames
Building a Host Table
Using DNS to Resolve Names
Checking Network Connectivity
Using the ping Command
Using the traceroute Command
Sumary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 9
Hands-on Labs
Hands-on Labs 9.1:Backing Up Your Router IOS
Hands-on Labs 9.2:Upgrading or Restoring Your Router IOS
Hands-on Labs 9.3:Backing Up the Router Configuration
Hands-on Labs 9.4:Using the Cisco Discovery Protocol(CDP)
Hands-on Labs 9.5:Using Telnet
Hands-on Labs 9.6:Resolving Hostnames
Review Questions
Answers to Review Questions
Answers to Written Lab 9
Chapter 10 Internet Protocols
Introduction to Access Lists
Standard Access Lists
Wildcard Masking
Standard Access List Example
Controlling VTY (Telnet)Access
Extended Access Lists
Extended Access List Example
Named Access Lists
Monitoring ccess Lists
Summary
Exam Essentials
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 10
Hands-on Labs
Hands-on Labs 10.1:Standard IP Access Lists
Hands-on Labs 10.2:Extended IP Access Lists
Review Questions
Answers to Review Questions
Answers to Written Lab 10
Chapter 11 Wide Area Networking Protocols
Introduction to Wide Area Networks
Definging WAN Terms
WAN Connection Types
WAN Support
Cabling the Wide Area Network
Serial Transmission
Data Terminal Equipment and Data Communication
Equipment
Fixed and Modular Interfaces
High-Level Data-Link Control(HDLC)Protocol
Point-to-Point Protocol(PPP)
Link Control Protocol(LCP)Configuration Options
PPP Session Establishment
Configuring PPP on Cisco Routers
Configuring PPP Encapsulation
Frame Relay
Intrduction to Frame Relay Technology
Frame Relay Implementation and Monitoring
Integrated Services Digital Network (ISDN)
ISDN Connections
ISDN Components
Basic Rate Interface(BRI)
Primary Rate Interface(PRI)
ISDN with Cisco Routers
Dial-on-Demand Routing(DDR)
Configuring DDR
Optional Commands
DDR with Access Lists
Verifying the ISDN Operation
Summary
Exam Essentials
Key Terms
Commands Used in This Chapter
Written Lab 11
Hands-on Labs
Hands-on Labs 11.2: Configuring and Monitoring HDLC
Hands-on Labs 11.3:Configuring Frame Relay and Subinterfaces 497
Hands-on Labs 11.4:Configuring ISDN and BRI Interfaces
Review Questions
Answers to Review Questions
Answers to Wretten Lab 11
Appendix A Commands in This Study Guide
Glossary
猜您喜欢
