The standard specifies the inspection and testing rules of new-built passenger cars after completion of construction，as well as inspection item，method and determination of result included in each inspection.The standard applies to the seating car，berth car，luggage car，post car，dining car，generator car and combined car with full-metal car body with a design speed of no more than 200 km/h used on standard gauge railway. For special-use trains and non-standard gauge passenger cars with full-metal car body business car，maintenance car and test car，such as business car，maintenance car and test car，could implement the standard as reference.

This interim provision is prepared to standardize the engineering design of natural disaster and foreign object intrusion monitoring system for railway （hereinafter abbreviated as disaster monitoring system or DMS for short）.This interim provision is applicable to DMS engineering design for new railway lines or reconstructed ones.

This code is developed to enhance the risk management of railway construction projects，improve the technical level of the risk management and unify the risk management technical requirements.This code is applicable to the risk management of new railway construction projects.

《现代汉语小词典》参考现行不同版本的语文教材，收录常用字近3500个，每个字头后标列该字的读音、部首、笔画数及字形结构，其中，读音依据《汉语拼音方案》注音，部首遵照《汉字部首表》明确归类，充分体现了语文工具书的规范性与实用性；此外，在教材常用词语的基础上适当延伸扩充，收录常用词语近12000条，释义简洁明了、浅显易懂，并补充了部分新词语和常用词语的新义项，体现了现代汉语的时代性和发展性。

为规范在建设工程中使用高分子复合材料检查井盖、水箅，保障检查井盖及水箅的质量和使用安全，提供检查井盖、水箅的生产、应用的技术依据，以利于技术进步、确保质量，制定《四川省工程建设地方标准（DB51/T5057-2016）：四川省高分子复合材料检查井盖、水箅技术规程》。《四川省工程建设地方标准（DB51/T5057-2016）：四川省高分子复合材料检查井盖、水箅技术规程》适用于四川省新建、扩建和改建的建设工程中使用高分子复合材料检查井盖、水箅的生产及应用。《四川省工程建设地方标准（DB51/T5057-2016）：四川省高分子复合材料检查井盖、水箅技术规程》中凡未指明检查井盖或水箅应符合的条款，则为两者共同遵守。高分子复合材料检查井盖、水箅及所用的原材料除执行《四川省工程建设地方标准（DB51/T5057-2016）：四川省高分子复合材料检查井盖、水箅技术规程》外，尚应符合国家及四川省有关标准的规定。

暂缺简介...

This Specification is provided for the purpose of guiding the construction of falsework for cast-in-place construction of railway concrete girders，harmonizing main technical requirements，enhancing construction management，and ensuring construction quality.This Specification is applicable to the falsework for cast-in-place construction of simply-supported or continuous girders.

This standard specifies the requirements and test methods for the performance of flame retardant for the decorating materials for multiple units.This standard applies to decorating materials for multiple units at or above the operating speed of 200 km/h.

This standard stipulated the catalogue and coding， defect description， causes of defects，means of detection and methods should be taken of various rail defects.This standard applies to the statistics of rail defects， Cause of defect and defect information treatment.This standard doesn't apply to the following defects：a）The rail parts made from cutting and forging rails，such as switch rails（point rails，wing rails） ，guardrail，expansion joint rails，etc.;b）Driving accidents caused by the non-rail defects or rails caused by the disaster;c）The few special rails made from the special experiment materials or with special cross section out of this standard.

This standard specifies the test facility and environment of locomotive car body strength test，test details，measuring point arrangement，test equipment and instruments，test methods as well as stress calculation，deflection measurement，evaluation of static strength and stiffness，test report and so on.This standard applies to test and evaluation of static strength and stiffness of general purpose locomotive car body used for standard gauge railway.For locomotives of other purposes，this standard may be followed.